Third Time’s the Charm: Here’s How I Restarted My Dexcom G6

You GUYS! I finally did it! I managed to restart my Dexcom G6. Sometimes, a little bit of trial and error pays off.

I restarted it by following the exact same steps that I linked to in my post from a few weeks ago. It involved five simple things:

  1. Allowing my sensor to expire and remain on my body
  2. Starting a new sensor session and choosing “no code” when prompted
  3. Running the 2-hour warm-up session for only 15 minutes, then stopping it
  4. Starting a new sensor session again, without a code (if you still have the code, though, that you used when you first inserted the sensor, then enter that into your receiver/app. But don’t make up a code or enter one from another sensor – just say “no code” if you don’t have it)
  5. Allowing the 2-hour warm-up session to take place and receiving readings once it’s complete

The only thing that was different between this time and last time was the steps leading up to the restart. What do I mean by that? Well, for starters, I made sure I was attempting to restart a sensor that was giving steady, reliable readings – it seems as though it’s impossible to restart a sensor if it’s experienced any sort of error in the 10 days it’s been worn. So this means that when the sensor expired, I’d been receiving readings consistently up until the moment it expired.

afd124d9-95d7-48be-b5dd-7445fc6efdd2
That gap represents the sensor’s second round of two-hour warm-up.

That was the main difference. The location of the sensor I restarted was the back of my arm, which may or may not have affected the restart. I also restarted without using the sensor code, which I had set aside to use but somehow misplaced prior to the attempt. I have no idea if having or not having the code makes the restart more or less successful, but I do know for sure that I got three more full days of use out of my sensor. Cumulatively, that means that I was able to wear the same sensor for almost two full weeks! It might not seem like a lot to the marathoners who are able to make older G5 sensors last 3-4 weeks (I’ve even heard of people keeping the same one on and working for 6 weeks), but it’s exciting to me to have confirmation that it IS at least possible to restart a G6 sensor.

In terms of the sensor accuracy, dare I say that it was even MORE accurate on the second go?! I don’t have proof to really back that up, but honestly, it seemed that it was right on point with all my blood sugar readings (within 5-10 mg/dL). I don’t know how to explain that, but no complaints about it here.

The only other difference that was noticeable during the sensor extension was that I was prompted to calibrate at least every 12 hours. No big deal, since I had to do that when I was on the G5. But it caught me off-guard a bit at first, because on both my receiver and within the Dexcom app, a small blood drop icon was always visible onscreen (when actively checking the app or the receiver). Initally, it wasn’t too alarming because it was merely a reminder to calibrate twice daily. But then it became an absolute nuisance when weird “calibrate after __ A.M./P.M.” messages occurred multiple times per day. I would check my blood sugar at the appropriate time and enter the result into my app/receiver, only for it to be rejected and trigger another specific time-calibration message.

To me, that indicated that my sensor’s second go-around ought to come to anend sooner rather than later. It was getting obnoxious to have to wait and check my blood sugar manually in order to appease the Dexcom messages that kept popping up. Plus, it came down to my comfort levels with wearing a sensor for a certain length of time – I just don’t love the idea of keeping the same one on for ages.

But this was my first taste of success with restarting a sensor, so naturally, I want more of the same! I’ll definitely continue to try to extend the life of future sensors, but remember, follow the steps above at your own risk. When in doubt, simply follow protocols as outlined by Dexcom. If I experience an even more successful sensor extension, you can bet that I’ll have all the details to share with you all here.

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s